Brief introduction electronic potting compound sil...

Electronic potting compound silicone rubber is an environmentally-friendly addition cure silicone rubber,which is similar to kcc potting silicone rubber. It is suitable for bonded seal of electronic components,control module and power module, which requires waterproof and anti-vibration. 　　The electronic potting compound silicone rubber is a kind of inherent flame resistance,low viscosity,two components silicone rubber with heat-conducting. And its mixing ratio is 1:1,which make it easy in operation and pourable. 　　The electronic potting compound silicone rubber can cure in both room temperature and heated temperature.With the feature of the higher temperature the faster of the curing time,it can be applied to electronic components for insulation,waterproofing,fixed and flame retardant.The flame retardant ul94-v0 level can be achieved.It mainly applied in electronic components surface with materials of pc (poly-carbonate),pp,abs,pvc, etc.And metal materials. 　　The operation of electronic potting compound silicone rubber is to put part A and part B in a separate container with equal dosage and stir evenly when mixing the two parts together.And then put the mixture into the vacuum machine under 0.08 mpa for 5 minutes.By the way,when in too low temperature,we suggest customers appropriately heat the mixture to accelerate vulcanization.