Electronic potting compound operation instructions

Electronic potting compound is a kind of two components addition cure silicone rubber with the characteristics of heat-conducting.Here are some notes and operation instructions as follow:     　　1.The following material may hinder the curing of electronic potting silicone rubber,so please use after the test.When necessary,please clean the application areas. 　　a.Organotin compound or condensation silicone with organotin 　　b.Sulphur,sulfide and sulfur rubber materials. 　　c.Amine compounds as well as contains the amine materials. 　　d.Pewters solder flux. 　　2.Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring. 　　3.Please note that the thickness of the silicone rubber affects the curing time.If the silicone rubber used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature,we suggest customers appropriately heat the mixture to accelerate vulcanization. 　　4.Above electronic potting silicone rubber should be sealed storage.The mixture should be used up to avoid causing waste. 　　5.Above silicone rubber belongs to non-dangerous goods,but keep away from mouth and eyes. 　　6.When it gets stratified after a period of storage, please mix it evenly before using, which does not affect the performance. 　　If you have any question,please feel free to contact us:86-0755-89311348,you can also e-mail us info@szrl.net.