Operation Instruction of Making Silicone Pad with Pad Printing Silicone Rubber 1.Weigh part A&part B according to the mixing ratio of 9:1 2.Stirring evenly Mix part A and part B evenly. 3.Vacumm pumping Vacuum pumping to de-air. The time is around 3-5 mins. 4.Pouring Pour the silicone rubber into the mold. 5.Put a board on the surface 6.Demoulding 4-6 hours later, the silicone rubber is cured completely. Get silicoen pad from the mold and a printing pad is completed.
Copyright All Rights Reserved © SHENZHEN HONG YE JIE TECHNOLOGY Co.,Ltd 粤ICP备17107859号