Silicone rubber wire and cable

Silicone rubber wire and cable 1, equipment, instrument with no woven along     Silicon rubber is soft, capable of ozone, corona, flame, good insulation properties, used for wire and cable is mainly used in electrical industry, silicone rubber wire and cable is especially suitable for high temperature and harsh environment use, its life is much higher than ordinary cable. Below are the specifications and applications of five kinds of common silicon rubber wire and cable: Rated voltage: 300 volts and 600 volts; Operating temperature: 150℃ and 200 ℃; Structure: tinned copper stranded wire, silicon rubber insulation layer; Features: no woven dirt, temperature resistance, flame resistance, mechanical flexibility and toughness; Purpose: high temperature motor, transformer, generator, electronic, electrical equipment. 2.Woven lead line、 equipment、 instrument    Rated voltage: 300 volts and 600 Volts    Operating temperature : 150 ℃, 155 ℃, 180 ℃, and 200 ℃ Structure: stranded copper tin, silicon rubber insulation layer, asbestos or glass fiber woven belt; Characteristics: heat resistance, flame resistance, flexible Purpose: high temperature motor, transformer, generator 3, marine cable     Rated voltage: 300 volts and 5000 volts;     Operating temperature: 95 ℃; Structure: tinned copper stranded wire, silicon rubber insulation layer, glass fiber woven belt. If the conductor is more than one, the gasket, the wire and tape, PVC casing, aluminum or bronze Armor Fabric twisted into a rope; Characteristics: heat resistant, resistant to moisture, no conductive dust; Purpose: general marine power and control cables, especially suitable for occasions of ambient temperature over 50℃, and the flame resistant, heat-resistant need moisture. 4, the power and control cables Rated voltage: 600 volts and 5000 volts Operating temperature: 125 ℃ Structure: A. power cable: tinned copper stranded wire, silicon rubber insulation tape, asbestos braid; B. control cable: tinned copper stranded wire, silicon rubber insulation layer, glass fiber woven belt, put two or two above wire and tape, asbestos braid twisted into a rope. Characteristics: heat resistance, moisture resistance and ozone resistance, room temperature and low temperature flexibility is good, the bearing current capability, radiation resistance, flame resistance, no conductive ash, no corrosion of smoke. Purpose: high temperature, damp, dry place and power line, radioactive environment control lines and signal lines. 5.the car ignition cable Rated voltage : 35000 V ( AC ) Operating temperature: 177℃ to 232 ℃ Structure: the glass fiber core semiconductive, ethylene-propylene rubber insulation layer, woven glass fiber woven belt, silicone rubber ( gb.szrl.net ) wrapping. Features: high temperature resistance, ozone resistance, high dielectric strength, excellent reliability Use: ignition cable cars, trucks and other transportation vehicle engine.