Silicone Rubber for Soap Mold

Features of silicone rubber for soap mold ⑴Low shrinkage ⑵Favorable tension ⑶No deformation ⑷Favorable hardness ⑸Light viscosity and good flowability ⑹Good characteristics of easy-operation ⑺High temperature resistance, acid and alkali-resistance and ageing   Operation instructions of silicone rubber for soap mold Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.   Step Two: vacuum pumping---Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3—5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture silicone into the mold frame slowly.     Our company provides silicone raw materials for soap. The model codes of HY-620 and HY-720 are particularly suitable silicone rubber for soap mold. The model codes of HY-620, HY-720 with the common hardness of 18-22 shore A has the features of light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength. HY-620 and HY-720 are a kind of soft silicon rubber and most suitable for pouring mould making of small crafts. Therefore, the characteristics of these two models determine that they are suitable for soap products mold. Next, I will introduce some other parameters of HY-620 and HY-720.   Technical datasheets of silicone rubber for soap mold   Model Color Viscosity(mPa.s) Hardness (Shore A0) Tensile strength (MPa) Tear-strength (kN/m) Elongation（%)   Catalyst Mix Ratio (by weight) Operating Time（h)   620 White 17000±2000 20±2 2.8 19±2 530 2%-5% 0.5 720 White 19000±2000 20±2 2.7 17±2 390 2%-5% 0.5 Notes: ⑴All the parameters are for reference only, if you have special requirements please contact us. ⑵Standard curing time will vary depending on the size of the cured item, temperature and humidity. ⑶Different hardness and colors are available if you requested. ⑷Curing agent with different curing speed can be adjusted. ⑸If you cannot find a suitable product please get in touch with us.   Shenzhen Hong Ye Jie Technology Co., Ltd., which was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber and silicone products. Since 2001 Shenzhen Hong Ye Jie Technology has been known and respected in China, as professional producer of silicone rubber. It sets up Hong Kong Hong Ye Ltd., Shenzhen Hong Ye silicone rubber Factory and other affiliated enterprises in 2005. Today we are recognized as the global leader in the manufacture of high quality silicone rubber products in an unsurpassed variety of RTV-2 silicone, HTV silicone rubber, LSR, etc.   Currently 95% of our products has been widely exported to more than 90 countries and gets its great reputation from all over the world. Customers and distributors from worldwide are welcomed to negotiate with us for business cooperation! You can visit our website at http://www.szrl.net for more information or contact us by email at info@szrl.net!