Introduction silicone injection molding

Introduction silicone injection molding   Injection molding liquid silicone rubber , high temperature curing , elastomeric formed has the following outstanding properties: transparency, better tear strength ≥ 35N / m, good elasticity , thermal stability and weather resistance ( temperature -60 ℃ - 250 ℃), yellowing resistance , heat aging resistance line with USA CFR 21.Part.177.2600 and European EN14350-2 section 4.9 of volatile compounds tested standards and European ROHS standards. Figure - plastic injection molding At 20 ℃, A / group B were mixed after in a sealed condition for safe operation time is 5 days , safe operation at elevated temperatures shorten the time suitable for use with the injection molding process , two-component , high transparency, high strength, high tear resistance of liquid silicone rubber is mainly used for the injection molding process , cake molds and other silicone products.     Silicone injection molding , injection molding, liquid silicone rubber at high temperature curing silicone , the abbreviation LIM (Injection Moulding Silicone Rubber) is a suitable two-component injection molding process translucent liquid silicone rubber material . Has the following outstanding properties:     1 . High mobility, high resilience ,     2 . High strength, high transparency,     3 . Key life of up to 10 million times     4 . Shrinkage stability,     5. Ease of injection , excellent thermal stability and resistance to cold ( temperature -60 ℃ ~ 250 ℃)     Injection molding silicone has its own unique storage method : According to the original factory packaging, storage within a maximum of 25 ℃ in a cool dark place , the validity period of 180 days storage products (production date) , after product use , if not run out , immediately sealed , or affect the validity of storage .     Injection molding silicone precautions following three points:     1 . Take A, B agent tool to distinguish or Wipe clean before use , to avoid causing a mixture of both local agglomeration is not working ;     2 . A, B groups were mixed after full uniform, must be used within 72 hours ; 3 . Avoid the use of mixed acid, water , alkalis , strong oxidizing agents , avoiding containing N, contacting the compound S, P, Sn and other elements , otherwise it will cause little or sulfurized product is not entirely the case ; Ye Jie Technology Co., Ltd. welcome new and old customers and dealers to negotiate business and cooperation agency. Let us join hands to create brilliant. you can email us info@szrl.net.