Addition Cure Liquid Silicone Rubber for Food Grad...

The food grade liquid silicone rubber is a two-component,translucent, addition cure liquid silicone rubber with superior mechanicalproperties, particularly for button production of silicone rubber in high hardness and high strength. 　　Specifications: 　　1.Odorless; 　　2.High tensile strength; 　　3.Apply to injection molding progress; 　　4.RoHS certificated,FDA,LFGB certificated. 　　Features: 　　1.Fast curing; 　　2.High transparency; 　　3.Superior mechanicalproperties; 　　4.No curing by-product; 　　5.Easy color; 　　6.Safe non-toxic; 　　7.Good ventilation; 　　8.Heat resistance; 　　9.Good weatherresistance. 　　Applications： 　　Electronic key products of mobile phone; mask material; baby product,baby nipple, baby pacifier,baby toothbrush 　　Operation instructions： 　　1.Mixed A with Baccording to mixing ratio of 1:1 through the static mixer,then injectingthe mixed rubber into the mold through the injection machine, the rubber mustbe full filled(hand-mixing isfeasible, poured into the mold for molding) 　　2.Recommended molding conditions: 140°C/40-60s (thickness 2mm). 　　3.Test and determine the specific conditions of molding according to the thickness orsize of product 　　4.If the bonding between the special material and silicone rubber is needed(e.g. PET,PC,iron andsteel materials, etc.you can check the accessory products of the silicone adhesive about our company ) 　　Notes: 　　1.Separate or wipe clean the tools of part A,B before use , or it may cause the product can’t working normally because of the A&B mixedand local agglomeration 　　2.The effective operating time of the liquid silicone rubber is 4hours after the uniform mix between part A&B 　　3.During the rubber operation, avoid contact the compounds which contains the N, S, P, Sn, etc, or it will causeincomplete curing or not curing. 　　4.The best mix ratio of the liquid silicone rubber is A/B=1:1, toolarge or too small will influence the final product performance 　　5.Note the labor wearable during the application, avoid high-temperatureburns during the construction process,and prohibit consumption. 　　6.Use the liquid silicone rubber carefully, note the safety issues before and during use, moreover, follow the relevant provisions of national or local government safetyregulations. (Refer to the appropriate safety guidelines for details in MSDS) 　　Shenzhen Hongye Jie Silicone factory is specialized in silicone products and their production, research and development, and sales of Science and Technology Corporation. Has an excellent professional performance, superior quality, complete specifications. A wide variety of technical team of silicone rubber products. Welcome customers and dealers to negotiate, expert advice hotline :400 -779-4008, or you can email us info@szrl.net.