Have you hear about platinum cure silicone rubber?

Platinum cure silicone rubber could be used for making heart cake mould(also mould for edible cake decorations), candy mold,gelatin mold, and it is food safe silicone for cake mould. 　　Characteristics: 　　1.Low shrinkage (less than 0.1%); 　　2.High tensile and tear strength with high duplication times, long-term stability; 　　3.Easy for operation (mixing ratio at 1:1 /10:1); 　　4.Very good flow and easy for pouring operation; 　　5.Fast and nil shrink, cure at room temperature which can be accelerated considerably by the application of heat. 　　Operation introduction: 　　1.Please clear the model and tool totally before operation to prevent cure inhibition. 　　2.Weigh the two parts correctly by electronic weight in two separate containers. 　　3.Mixing the two parts in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes. 　　4.And get the mixture for vacuum-pumping for de-air the bubble in around two to three minutes. 　　5.Fix the original model on a clean and thin board. 　　6.Make a mold frame with four plastic plates or wooden plates. 　　7.Clean your products and brush a layer of release agent (detergent or soap water) on your product. 　　8.Pour the vacuumed mixture into the model frame from the side of the mold frame. 　　9.4-6 hours later, a clear silicone mold will be perfectly obtained. 　　10.After about 24 hours, you can put it into production. 　　Notice: 　　As our E-series silicone is platinum cure silicone, which is very easy to cause cure inhibition, so please do not forget to clean the model and tool before moulding.Besides, please avoid the liquid E630 silicone mixed  with the following material, otherwise the silicone won't be successfully cured: 　　1.Condensation silicone not completely cured or organic tin compounds. 　　2.Sulphur, sulfide and sulfur rubber materials. 　　3.Amine compounds and materials that contain the amine. 　　4.Pewter solder flux. 　　Shenzhen Hongye Jie Silicone factory is specialized in silicone products and their production, research and development, and sales of Science and Technology Corporation. Has an excellent professional performance, superior quality, complete specifications. A wide variety of technical team of silicone rubber products. Welcome customers and dealers to negotiate, expert advice hotline :400 -779-4008, or you can email us info@szrl.net.