How to use silicone rubber to make hand mold?

How to use silicone rubber to make hand mold? Are you interested in it?   　　First prepare the necessary tools (brush and scissors).Brush a layer of release agent evenly on the hand after clean the body hair. 　　Select the right type of silicone rubber according to the complexity of the product structure, size and usage of the original mold.Here leaves our HY-SY 830 Silicone.Mix the the silicone rubber and curing agent fully at the proportion of 1:100 with 2% -5% proportion and vacuum pumped to -0.1mpa, which help the mold out of bubbles and improve quality. 　　Brush instructions: 　　Brush the first silicones evenly on the surface of hand.(Please deal with carefully of the gaps of hand fingers).After the first layer of silicone to be cured, a second layer of silicone which has been vacuum pumped is brushed. 2-3 layers of silicones could be brushed. 　　We could de-mold when the silicones have been completely cured.Use high pressure air gun to blow into the silicone mold in order to separate the silicone and skin easily.Trim the edge of the mold after de-molding. 　　The mold could be put into production after being put in a ventilated cool and dry place for 24 hours. 　　Pouring instructions: 　　First, brush the Vaseline evenly on the the inner wall of the silicone mold. Then fix the mold to the bracket to ensure no- deformation. Here we use our HY-E610 to make hand mold. 　　Mix the HY-E610A and HY-E610B at the proportion of 1:1 evenly and then vacuuming. 　　Take a good amount of processed silicone into the mold and pour it slowly at the beginning to avoid excessive airs .Then speed pouring silicone a little, which should be 1 cm lower than the mold. De-mold when the silicone has been cured fully. Use high pressure air gun to blow into the silicone mold in order to separate the silicone and skin. 　　For now the silicone hand mold has been completed. 　　Shenzhen Hongye Jie Silicone Factory professional development, increase production of liquid silicone molding, liquid silicone molding plus, plus liquid silicone rubber molding silicone products, welcome customers and dealers to negotiate, expert advice hotline:86-0755-89311348, you can also e-mail us info@szrl.net.