Thin silicone for pouring molding

THIN SILICONE FOR POURING MOLDING DESCRIPTION
        Pouring molding thin silicone is generally named as two-component room-temperature curing liquid silicone rubbers, part A is silicone material, part B is curing agent (catalyst). It is perfect for one piece molds, molds with undercuts, piece molds, and molds that require a very high tear strength.


THIN SILICONE FOR POURING MOLDING APPLICATION
        Thin silicone of RTV-2 liquid molding silicon is suitable for making molds by pouring molding method, such as for garden decorations of artificial hill, artificial coral, artificial copied, garden sculptures, fiberglass animal, flower pot, statues Buddha, building decoration materials, large-scale cement mold, simulation landscapes, animals and plants sculpture, sandstone crafts and other superior manual mold molding and casting, as it excellent features .Some of the materials you can cast into a silicone mold are: Plaster, Urethane Rubber, Fiberglass Resign, Urethane Plastic, Polyester, Epoxy, Wax, Low melt metals (up to 400 degrees Max), HydroCal White, Soap, concrete statue mold, rigid foam and so on. 


THIN SILICONE FOR POURING MOLDING FEATURES
1.No-deformation and high duplication times and repeated use.

2.Excellent tensile and tear strength, Favorable tension, low shrinkage

3.Good characteristics of easy-operation

5.Various hardness with shore A 20-35

6.High temperature resistance, high duplication times and repeated use.

7.Suitable for brushing molding and pouring molding.

8.the mixed ratio is from 100: 2 to 100: 5 (large adjustment range of hardness)



THIN SILICONE FOR POURING MOLDING OPERATION
        Step 1: prepare the original molds Prepare an perfect mold modleand clean it totally (the release agent can be detergent, soapy water and Vaseline) before operation .Take 100g silicone material and 2 ~ 5g curing agent strictly and mix them evenly. * Notes: Make sure the toys and operation tool cleaned up totally to avoid uncure problem.

        Step 2: Vacuum pumping Without exception, this step takes less than 10 minutes. (Normally is 5munites) Otherwise, it will cause cross linking reaction, and no more further steps will be available.

        Step 3: Pouring casting or Brushing operation
1. For simple pattern products suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air. (Mold with fine and precision patterns with low hardness.)

2.For delicate pattern products we suggest use brushing operation way.which can copy the pattern exactly .brushing way require high viscosity which will not be easy to flow away and easy to brush. (Large size molds with high hardness) 3.The amount of the curing agent can be adjusted according to the actual requirements of the customer If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed .but we do not suggest to add silicone oil avoid oil problem.

        Step 4: Demoulding: After 35 hours later, can demould the silicone mold, It's will be better for mold to demould after 24 hours Notes: The curing temperature and curing time can be adjustable according to the operation conditions.



THIN SILICONE FOR POURING MOLDING SHELF LIFE
Twelve (12) months from date of shipment when stored under 25 ℃ in the original sealed packages at dry and cool places.


THIN SILICONE FOR POURING MOLDING PACKAGE
1kg / jar, 5kgs / drum, 20kgs / drum, 25kgs / drum, 200kgs / drum and vacuumed packing is available.