RTV-2 molding silicone rubber for concrete pavers

Sometimes when we find that some “stones pavers” is made by concrete, we may be curious about the reason why it can be so lifelike.     In fact, RTV-2 molding silicone rubber for concrete pavers has magic in terms of that.   1.Prepare several pieces of original stone pavers, which serve as mother models(there are typical stone patterns on the surface). 2.Clean mother models with detergent then blow-dry the models. 3.Evenly spread some release agents on the surface of stone pavers. 4.Build wooden mold frame tightly and closely around the concrete pavers. You should make sure that no seam has been left. 5.Use some textured clay to fill in seams between every two stone pavers. Smooth the clay face with tools. Spray some release agents on the inner surface of wooden mold frame evenly. 6.Make a firm wooden bar traverse several straps. Put the wooden bar traverse middle position above wooden mold frame. The straps can not touch surface of stone pavers, that is, the length of the straps should ensure it is suspended. 7.Weigh out appropriate component A and component B of RTV-2 molding silicone rubber for concrete pavers. Then fully mix the two silicone rubber components. 8.Do the vacuumizing process. 9.Pour the RTV-2 molding silicone rubber into wooden mold frame at a low speed until about half the straps are immersed in RTV-2 silicone rubber mixture. 10.About 24 hours later, the RTV-2 molding silicone rubber for concrete pavers completely cures. At this point you can do the task of demolding. 11.Form a wooden wall box to contain concrete, which is used for paving. 12.Pour concrete into wooden wall box and smooth surface of the concrete. 13.Cover surface of concrete with finished RTV-2 molding silicone(let the patterned face touch concrete). Use some tools to press the molding silicone rubber pieces. 14.Some time later, uncover the molding silicone pieces. Modify some imperfections of “seams” then a perfect concrete pavers is completed.   Shenzhen Hong Ye Jie technology Co. Ltd provides for you with RTV-2 molding silicone rubber for concrete pavers of high quality. Your demand is the most valuable mission we’d like to achieve. Do you want to obtain more details of Hongye products and services? just enter our cellphone entrance: http://m.szrl.net and our computer entrance: http://www.szrl.net. (FAX: 89948030 TEL: 086-755-89948019 086-755-89948006 EMAIL: info@szrl.net).