Silicone mold filling

Silicone mold filling 　　AB silicone mold filling is composed of two components, A flowable liquid component, component B is a curing agent. Both uniformly mixed, vacuuming process, pay attention to the processing time to master the process, should not be too long, to prevent the cross-linking reaction time, curing uneven phenomenon. 　　Special mold making silicone mold filling 　　After filling the mold is generally used for relatively smooth or simple product, soon to be copied or model of the product, with the offset or glass enclosed, the smoked vacuum silicone directly into the surface of the product, such as silicone molding dry, remove the product , then molding mold. 　　Note: 　　An irrigation hardness silicone mold used is relatively soft, easy stripping to prevent damage to the silicone mold inside the product. 　　The hardness of the second mold with the size of the product, adapted to the complexity. For example, using a large hardness silicone products do little complex product pattern mold, there will be fewer turning model of the phenomenon, and silicone excellent break easily. 　　Three special silicone mold filling mold release products made time not too long, to be controlled within 3min of preventing silicone molds appear burning film phenomenon. 　　4 using silica gel, add the appropriate amount of 0.05% of water, stir, there is dry to prevent mold silicone inside quit phenomenon. 　　Shenzhen Ye Jie silicone factory is specialized in silicone and series production, research and development, and sales of Science and Technology Corporation. Has an excellent professional performance, superior quality, complete specifications. A wide variety of technical team of silicone rubber products. More special mold silicone mold filling, filling the mold silicone, perfusion prototype model making, potting compound and other silicone rubber products all in red Ye Jieguan net. Welcome customers and dealers to negotiate, expert advice hotline: 400-779-4008, or you can e-mail us info@szrl.net.